I picked up a job site table saw a few years ago and decided to combine it with a router table that would slot into the extension arm of the saw. On top of that I wanted a multipurpose fence that would function for the saw as well as the router table. The whole unit can be folded up and wheeled into a corner when not in use. The router table and fence also incorporate a dust collection system into the mix. Part one features the router table and part two covers building the fence.
PARTS LIST Materials:
.5″ HDPE (the white cutting board material)
.625″ Phenolic Sheet (reddish material used for the router inserts)
.5″ MDF Adhesive backed wood veneer (Oak on the table top)
.75″ and .25″ Baltic Birch Plywood PETG Filament (3D printed parts)
Extrusions and Hardware:
1.5″ x 4.5″ x 36″ Main Extrusion (8020 brand) https://amzn.to/3H4XfXB
1.25″ x .5″ T-Track (see plans for exact dimensions)
Generic Brand 2x Angle Brackets for 1.5″ Extrusions (8020 brand) https://amzn.to/3H51ceY
Dust ports came from Rockler
Handle for Fence https://www.mcmaster.com/6305K18
Fasteners:
8-32 x 7/8″ https://www.mcmaster.com/91770A198
8-32 x 5/8″ https://www.mcmaster.com/91770A201
8-32 x 1.25″ https://www.mcmaster.com/91770A196
8-32 Rivet Nut https://www.mcmaster.com/98280A240
1/4-20 Rivet Nut https://www.mcmaster.com/95105a143
1/4-20 Wide Head Bolt (for router enclosure) https://www.mcmaster.com/90015A410
1/4-20 x 2.75″ Bolt (for T-Track) https://www.mcmaster.com/92210A553
1/4-20 x .75″ Bolt (for fence attachments) https://www.mcmaster.com/91263A559
1/4-20 x 5/8″ Bolt (for fence extrusions) https://www.mcmaster.com/92949A539
Thumb Screw (for Fence Dust Collector) https://www.mcmaster.com/91510A157
Click the button below for free plans! Router Tables and Table Saws are dangerous industrial machines. Use caution! By downloading these plans you recognize that The 3D Handyman and 2 Point Media are not liable for any resulting injury, property damage, or death caused by the use of this machine or the building of this machine. BUILD AT YOUR OWN RISK!